Demountable Walls for Ontario and Nova Scotia Workspaces

Executive and Corporate Collections from Partition Systems – Canadian Made, Fully Relocatable, Supplied and Installed by Pac Rac Systems.

What Are Demountable Walls?

Demountable walls,  also called demountable partitions, movable walls, or architectural interiors are prefabricated, modular partition systems that divide commercial and industrial spaces without the permanence, waste, or construction disruption of traditional drywall. Unlike stud-and-gypsum partitions, demountable wall panels are manufactured off-site to precise specifications, delivered to the project, and assembled on-site using aluminum framing systems that attach to the floor track and ceiling without damaging the base building’s structure.

Modern demountable partition systems include glass walls, solid opaque panels, and combinations of both; with sliding door systems for offices integrated directly into the wall assembly. The result is a complete office interiors solution: private offices, boardrooms, collaborative zones, and glazed meeting rooms that look fully built-in, perform acoustically, and can be dismantled and relocated without a single hole in the base building’s slab or ceiling.

The defining advantage is recoverability. When a lease ends, an office layout changes, or a business relocates, demountable walls can be fully dismantled, transported, and reinstalled in a new location; with no waste sent to landfill and no dilapidation costs charged against the outgoing tenancy. In facilities where space requirements evolve frequently, this makes demountable walls a significantly more capital-efficient investment than permanent construction.

Executive Demountable Walls

The Executive Collection is engineered for high-performance commercial spaces where acoustic privacy, visual presence, and design precision are non-negotiable. Built using a unitized snap-on panel system, Executive walls are pre-fabricated in Partition Systems’ Edmonton facility and arrive on-site ready for fast, clean assembly — no wet trades, no construction debris, and no compromise on finish quality.

Pre-fabricated, fast, clean installation

Acoustic ratings for speech privacy

For a seamless, architectural appearance

Blocks airborne sound without sacrificing light

With premium surface finishes

Relocate when your lease ends with zero building damage

Corporate Demountable Walls

The Corporate Collection delivers an affordable, dependable, and design-forward wall solution for businesses that need to reconfigure space without the cost and disruption of traditional construction. Using unitized aluminum and glass panel systems, Corporate walls offer outstanding flexibility, panels can be adjusted, extended, and relocated as your team grows and your space evolves.

Clean, seamless appearance, excellent acoustic performance

Minimal operational disruption

Movable walls that adapt as your team changes

Crisp, uninterrupted visual flow between glass wall panels

Take your demountable partitions with you when you move

FINISHES


GET A FREE DEMOUNTABLE WALL CONSULTATION

Why Partition Systems Demountable Walls?

Canadian-Made
Designed and manufactured in Edmonton, AB by a family-owned company with 50+ years of production experience.

Fast Installation
Pre-fabricated panels install in a fraction of the time of drywall; minimal disruption to your operations.

Fully Relocatable
Both collections demount cleanly, leaving no damage to the base building, walls move with your business.

Sustainable
Zero construction waste, 100% recoverable at end of lease. A material choice that supports green building targets.



Acoustic Performance
High STC ratings and double-glazed options (Executive) deliver real speech privacy, not just visual separation.



Local Dealer Support
Pac Rac operates from local
offices in Ontario and Nova Scotia, managing specification, project coordination, and installation;  product ships direct from Partition Systems in Edmonton.”



Design Flexibility
Glass types, door styles, frame finishes, and solid panel colours are fully customizable to match your brand.



Turnkey Delivery
Space planning, specification, supply, and installation managed end-to-end by a single Pac Rac point of contact.



Where Demountable Walls Fit in Ontario and Nova Scotia Facilities

In Toronto, Mississauga, Hamilton, and across the broader GTA — where commercial lease costs make dilapidation exposure a meaningful line item — demountable walls offer a leasehold improvement strategy that protects capital. Tenants in Class A and B office buildings use Executive Collection glass walls and movable walls to create private offices, boardrooms, and collaborative enclaves without committing to permanent construction. Floor-to-ceiling architectural interiors with integrated sliding door systems for offices give these spaces a fully built-in aesthetic — without a single permanent fastener into the base building. At end of lease, the demountable partitions come down cleanly, transfer to the new location, and reinstall — zero sunk cost.

For warehouse and distribution facilities across Ontario — particularly in the 400-series highway corridors, the Oshawa automotive belt, and the Quinte/Belleville logistics zone — Corporate Collection walls provide an efficient way to create enclosed offices, quality control rooms, supervisor workstations, and meeting spaces inside open-plan industrial buildings. Combined with Pac Rac’s modular office systems and mezzanine platforms, demountable walls complete the workspace fit-out without requiring general contractors or wet trades.

In Halifax and the HRM, commercial tenants in office towers on Barrington Street and in the Burnside Industrial Park use both collections for workplace reconfiguration. Nova Scotia’s growing tech sector, healthcare administration expansion, and provincial government office consolidation have created steady demand for fast-deploying, reconfigurable wall systems that don’t require structural permits. Pac Rac’s Halifax office provides local project management, supply, and installation without relying on out-of-province coordination.

Frequently Asked Questions (FAQ)

Demountable walls are prefabricated, modular wall systems that can be installed, relocated, and reconfigured without the mess, waste, or structural damage associated with traditional drywall construction. They consist of aluminum-framed panels — solid, glazed, or a combination — that assemble with minimal disruption to the existing building. Because they leave the base building intact, demountable walls are 100% recoverable at end of lease and can be reinstalled in a new location, making them a capital-efficient alternative to tenant improvement drywall.

Demountable walls are referred to by several terms depending on the industry and application: demountable partitions, movable walls, glass walls (when the system is primarily glazed), and architectural interiors (when used in a broader office design context). The individual door components within a system are commonly called sliding door systems for offices. When a project encompasses the full scope of wall systems, glass partitions, and sliding doors, this is often described as office interiors. All of these terms refer to the same category of prefabricated, relocatable partition system — the variation is primarily regional and sector-specific.

Traditional drywall partitions are site-built from studs, insulation, and gypsum board — they are permanent, generate construction waste, damage the base building on removal, and cannot be recovered or relocated. Demountable walls are prefabricated off-site, install in a fraction of the time, produce no demolition waste, and can be fully disassembled and reinstalled elsewhere. For tenants operating on fixed-term leases, demountable walls protect against dilapidation costs and allow space investment to move with the business.

The Executive Collection uses a unitized snap-on panel system engineered for high-performance spaces: high STC acoustic ratings, double-glazed glass panels, floor-to-ceiling configurations, and a wide range of premium finishes. It is designed for executive offices, C-suite environments, and boardrooms where acoustic privacy and visual impact are priorities. The Corporate Collection uses a unitized aluminum and glass panel system — an affordable and fast-installing option that offers excellent design flexibility and reconfigurability. It includes Corporate Unitized Solid Walls and Corporate Low Demountable Glass Walls with slim aluminum profiles and butt-joint glazing for a modern, seamless aesthetic.

Yes. Partition Systems is a family-owned manufacturer based in Edmonton, Alberta. All Executive and Corporate wall systems are designed and manufactured in Canada, with production and engineering facilities in Edmonton. Pac Rac Systems is the authorized Partition Systems dealer for Ontario and Nova Scotia, supplying and installing PSL wall systems from local offices in Quinte West and Halifax.

Yes. Both the Executive and Corporate collections are designed to be fully demounted and reinstalled in a new location. The panels are engineered so that removal leaves no damage to the base building’s floor, ceiling, or perimeter walls — a significant advantage for tenants facing dilapidation clauses. Pac Rac Systems handles decommissioning and reinstallation as part of its relocation service.

Executive Collection wall systems are engineered with high STC (Sound Transmission Class) ratings using double-glazed panels that block airborne sound without sacrificing light. This makes them suitable for private offices and boardrooms where speech privacy is required. Corporate Collection solid panels also provide meaningful acoustic separation. Specific STC ratings vary by panel configuration; Pac Rac can provide specification sheets for individual wall system assemblies

Yes. Pac Rac Systems is the authorized Partition Systems dealer for Ontario and Nova Scotia. We supply both the Executive and Corporate collections and provide full installation through our own crews, operating from offices in Quinte West (Ontario) and Halifax (Nova Scotia). We manage the project from initial space planning and specification through to completed installation.

Demountable walls are used in commercial offices, corporate headquarters, co-working spaces, manufacturing and industrial administration areas, medical and professional offices, educational institutions, and government facilities. In warehouse and industrial settings, they are frequently used to create enclosed office spaces, quality control rooms, manager offices, and meeting areas within open-plan facilities — often in combination with Pac Rac’s modular office systems and mezzanine platforms.

Both collections support a range of customization options. Solid panels are available in stock laminate colours — typically 6 to 8 in stock, including Oxford White, Shadow Frost, Little Black Dress, Hardrock Maple, Sunbeam, Absolute Acajou, and Silver Frost. For larger projects, over 100 laminate colours are available through Panel Lab. Aluminum frame finishes include clear anodized, black, grey, and brown as standard stock, with custom RAL powder coat colours available for projects requiring a specific match. Hardware options cover sliding door mechanisms, swing door closers, and secure latch systems.

Maximize Your Space Today

With Pac Rac Systems, safety and compliance are not afterthoughts but integral parts of our design and installation process. Trust us to provide industrial materials and storage solutions that not only optimize your space but also ensure a safe working environment.

From warehouse security cages to modular offices to boltless shelving options and more, our expertise lies in crafting tailored solutions that precisely fit your business’s unique needs 

Don’t let limited floor space restrict your business’s potential. Let’s build the foundation for your business’s growth together.

Are you ready to transform your warehouse’s unused vertical space into a productive asset? Contact Pac Rac Systems today to explore how our warehouse mezzanine systems can revolutionize your space management and operational efficiency.

Request a Free Quote

Have questions about our pallet racking systems or want to request a quote? Contact us below and we will be glad to help answer your questions.

Click or drag a file to this area to upload.